The LED waterproof downlight is a spotlight made of integrated encapsulated leds. It does not require a circuit board. You can directly connect the drive power output line to the led lamp, and also use screws or glue to fix it on the lamp housing radiator. There is a lot of knowledge about LED waterproof downlights. Below, Yangzhong Hengyuan Lighting will introduce the use and installation, transportation and storage, precautions and maintenance methods of LED waterproof downlights.

Use and installation of LED waterproof downlight

       1. Open the package and check whether the accessories are complete

       2. When installing, directly screw the product into the screw hole to be energized to work.

       Note: If there is a power circuit board in the existing industrial and mining lamp power box, please disassemble the original circuit board before installing this product.

Transportation and storage of LED waterproof downlights

1. The LED waterproof downlights are packed in cartons. They should not be subjected to severe mechanical shocks, sun and rain during transportation, and prevent them from being dropped or pressed.

2. LED waterproof downlight lamps should be stored in a cool, dry and clean environment, the storage temperature is -20℃～40℃

Precautions for LED waterproof downlight

1. Please read the instruction manual carefully before use to avoid accidents and damage.

2. The lamp should be checked carefully before use. If any abnormality is found during use, please contact the supplier.

3. During use, there is a certain temperature rise on the surface of the lamp, which is a normal phenomenon.

4. This product is suitable for hanging and bare lamp installation.

5. This product is not suitable for outdoor installation.

6. When using and installing, we strongly require this product to have enough space for heat dissipation to ensure the service life of the product.

      Safety warning:

Any installation must be operated with the power off, and never work in a live environment.

Please abide by the relevant laws and regulations of the country, region, and place during installation.

Do not look directly at the LED lighting fixture at close range to avoid light damage to your eyes.

Four-point cleaning and maintenance of explosion-proof energy-saving fluorescent lamps and product characteristics

 The explosion-proof energy-saving fluorescent lamp shell is made of reinforced carbonate material, which has the characteristics of high strength, strong impact resistance, high temperature resistance and cold resistance. There is a lot of knowledge about explosion-proof energy-saving fluorescent lamps. Below, Yangzhong Hengyuan Lighting introduces the four-point cleaning and maintenance of explosion-proof energy-saving fluorescent lamps and product features.