Dust-proof and three-proof lamps are mainly for adapting the lamps to the environment. The three-proofs included are: waterproof, explosion-proof, and fireproof. This kind of lamps is mainly suitable for use in those special places. There is a lot of knowledge about the dustproof three-proof lamp, the following Yangzhong City Hengyuan Lighting introduces the two installation methods of the dustproof three-proof lamp and the difference between it and ordinary lamps.

      1. Ceiling installation: According to the installation hole size of the lamp, punch the corresponding installation bolt hole on the position where the lamp needs to be installed, and then install and fix it with bolts.

       2. Suspended installation: Suspended installation is mainly used in places with very high heights and a wide range of lighting requirements. When installing, use bolts to fix the lifting adapter plate on the lamp, and then connect the cable to the lamp. The pipe thread of the lamp and the wiring steel pipe with standard pipe thread can be screwed together.

The difference between dustproof three-proof lamp and ordinary lamps

       The dust-proof three-proof lamp is a kind of special lighting lamp with dustproof, waterproof and anti-corrosion functions made of special protective materials. If you want to make this lamp, you must protect the bulb and circuit from dust, Anti-corrosion treatment. Ordinary conventional lights do not have these three functions, but if they are dust-proof, waterproof, and corrosion-proof, they can also be used as dust-proof three-proof lights. Dust-proof three-proof lamps are mostly used in heavy industry places. Compared with conventional lamps, dust-proof three-proof lamps have the following advantages: anti-corrosion, dustproof, and waterproof. Of course, there are more than these three. Its durability is also Stronger than ordinary lamps, there are some others and so on. In addition, the dust-proof three-proof lamps produced by Prius Lighting have high requirements for the quality of the lamps. The accessories, light sources, electrical appliances and the assembly of the lamps have certain high requirements.