The LED patch three-proof lamp is mainly based on the adaptability of the lamp to the environment. The three-proofing refers to waterproof, explosion-proof, and anti-corrosion. It is mainly suitable for industrial lighting that is corrosive, dusty, and exposed to rain. In the place of demand. There is a lot of knowledge about the LED patch tri-proof lamp, the following Yangzhong Hengyuan Lighting introduces the production materials and production materials of the LED patch tri-proof lamp.

Materials for making LED patch tri-proof lights

        The LED patch tri-proof lamp is made of PC material. It is a better material style. Even if you step on the lamp, it will not break and is very durable; however, the transparency of this material is not as good as that of ABS material. The lamps made of ABS material are very brittle and easy to break, but the transparency of this material is very good and brighter. The price of PMMA material is relatively cheap, but it is inferior to that of ABS material. At present, the three-proof lamps and lanterns produced on the market are basically made of ABS+PS or PC+PS, but some African countries still prefer to use PMMA materials, mainly in terms of price.

Two installation methods of LED patch tri-proof lights

      1. Ceiling installation: According to the installation hole size of the lamp, punch the corresponding installation bolt hole on the position where the lamp needs to be installed, and then install and fix it with bolts.

      2. Suspended installation: Suspended installation is mainly used in places with very high heights and a wide range of lighting requirements. When installing, use bolts to fix the lifting adapter plate on the lamp, and then connect the cable to the lamp. The pipe thread of the lamp and the wiring steel pipe with standard pipe thread can be screwed together.