LED high bay lights refer to LED lighting fixtures used in production work in factories and other places. If LED high bay lights are classified according to their lighting functions, they can be divided into general lighting and local lighting. There is a lot of knowledge about LED high bay lights, the following Yangzhong City Hengyuan Lighting introduces the selection principles of LED high bay lights and later maintenance and installation attention.

LED high bay light selection principles and post-maintenance

       A good LED high bay light should have a good heart. The heart of the LED high bay light is the chip. The quality of the chip depends directly on the luminous flux of the LED high bay light and the speed of light decay. The second is heat dissipation. The use of poor heat dissipation aluminum will cause the life of the LED high bay lamp to be reduced due to excessive temperature. In severe cases, it may burn out the power drive. There is also the power supply. The power drive depends on whether the LED high bay light can work normally and the working efficiency and life span of the LED high bay light.

In addition to the above points of attention, there are many things to pay attention to. The colors should be coordinated to avoid the glare of the purchased LED high bay lights, the light is soft, and the brightness is uniform, which effectively avoids eye fatigue of the construction workers under long-term exposure. LED high bay light manufacturers choose poor heat dissipation aluminum materials, which will cause the life of the led high bay light to be reduced due to excessive temperature. In severe cases, the power supply may be burned out. The mechanism of the luminaire should use a high-strength alloy shell. Such a luminaire can resist strong collisions or impacts and ensure the safety of life.

In the later use, always wipe with a dry cloth, and pay attention to prevent moisture from entering the LED high bay light wholesale, so as to avoid rust damage or leakage short circuit after a long time, and wipe diligently to avoid affecting the light penetration. High bay lights are now widely used in industrial lighting, because most consumers have already understood its advantages. In the specific process of use, maintenance needs to be strengthened, so that the life of the lamp can be longer and the light efficiency can be better.

Attention to the installation of LED high bay lights

       First of all, we need to know that determining the installation height of the LED high bay light. According to the lighting environment, the environment will change the reflection efficiency of the lamp. Generally, the height of the lamp should be more than 5 meters, and the wire should not be close to the high bay light shell. If the conditions require, the installation time is less than 3 meters. , Need to take protective measures to prevent vehicles from touching! Secondly, LED high bay lights are waterproof and low temperature treatment, choose waterproof high bay lights, choose waterproof transformer, lamp chip package is wrapped with high temperature heat insulation material, technically waterproof, and can prevent low temperature damage to the lamp, and use it under harsh conditions LED high bay lights are very important! The most important thing is the wiring of LED high bay lights. The main line and the lamps are connected by flat hard copper wires, and one lamp is installed in 5 rings. According to the requirements of load balance, they are evenly connected to the three-phase line! For high-density lighting projects, the lamp housing is separately made of PE Protection line connection.