Five requirements and advantages for installing LED industrial and mining lamps
Datetime: 2021-08-21 15:33:00
The paint and glaze treatment of LED high bay lights will make it appear white, and reflectors made of aluminum, glass mirrors, prism glass and other materials can obtain a wide light distribution, which is suitable for large areas and vertical working surfaces. Or in a nearly vertical workplace. There is a lot of knowledge about LED industrial and mining lamps. Below, Yangzhong Hengyuan Lighting introduces the five major requirements and advantages of installing LED industrial and mining lamps.
Five requirements for installing LED industrial and mining lamps
1. Before installation, be sure to check the integrity of the LED industrial and mining lamps and the complete accessories.
2. When installing, it is necessary to require the installer to hold a professional electrician certificate, so as to prevent the personnel from not installing, resulting in mistakes and damage to the LED industrial and mining lamps.
3. The wiring on the LED industrial and mining lamps can be fixed from the drill hole through the wiring behind the lamp with a wire clip to ensure that the installation is firm enough.
Fourth, make sure that the power cord of the LED industrial and mining lamps can have enough length and not be affected by tension or tangential force. Avoid excessive tension when installing the connection of the luminaire, do not make the connection knotted, and pay attention to the distinction between the output connection and do not confuse it with other luminaires.
5. The distance between the product and flammable materials should be at least about 0.2m, and there should be a gap of 2 cm high on the top of the site where the LED industrial and mining lamps are installed. Note that the low-voltage and high-voltage cables should be routed separately.
Advantages of LED high bay lights
The LED high bay light has high luminous efficiency and is more energy-saving. It is equivalent to a 100W LED high bay light that can replace the traditional 250W traditional high bay light. Traditional light sources have the disadvantage of high temperature of lamps, and the temperature of lamps can reach about 200-300 degrees. The LED itself is a cold light source, the temperature of the lamp is low, and it is safer, and it is cold-driven. LED industrial and mining lamps are now in continuous innovation. The new led industrial and mining lamps have a more reasonable radiator design, which greatly reduces the weight of led industrial and mining lamps, and reduces the overall weight of about 80W led industrial and mining lamps to below about 4KG. Can well solve the heat dissipation problem of 80-300W LED high bay lights