Welcome to Golden Future Enterprise HK ltd.

What are the precautions for the installation of LED explosion-proof lights

Datetime: 2021-04-12 18:04:16


With the development of the industrial age, LED explosion-proof lights are also welcomed by many industries, and LED explosion-proof lights are more and more widely used. So, when installing LED explosion-proof lights, what precautions do you know? Let\'s take a look together.

What are the precautions for the installation of LED explosion-proof lights

1. LED explosion-proof light

1 Precautions for installation. First, check whether the product selection meets the requirements, and check the nameplate and appearance of the product.

2. Read the product manual carefully and don\'t install it blindly.

thumb_cameraheadlamp

3. The LED explosion-proof lamp should be installed firmly, the fastening bolts should not be replaced at will, and the spring washers should be complete.

4. The dustproof and waterproof sealing ring should be installed as it is;

5. The cable and gasket should be closely matched at the cable entry point. The cross section of the cable should be round, and the surface of the sheath must not have defects such as unevenness.

6. Block the excess wire inlets according to the explosion-proof type, and tighten the compression nut to seal the wire inlets;

7. After installation, carefully check whether the installation is firm.