Steps and methods for selecting high-power energy-saving LED high bay lights
Datetime: 2021-04-23 18:24:35
High-power energy-saving LED high bay lights can be divided into general
lighting and partial lighting according to their lighting functions. General
lighting is generally evenly placed on the top or side wall of the work site to
illuminate the entire work surface, requiring the use of high-power
incandescent lamps Lamps, tungsten halogen lamps, high-intensity gas discharge
lamps or a large number of fluorescent lamps. The vast majority of industrial
and mining lamps belong to this category. General lighting lamps have a high
demand for light dispersion, and two types of light dispersion, direct lighting
and semi-direct lighting, are widely used, especially the latter. In the
semi-direct lighting type, a part of the upwardly announced light illuminates the
ceiling, which can add the ceiling brightness to create a more comfortable and
brighter environment.
Steps and methods for selecting high-power energy-saving LED high bay
lights:
1. The quality of energy-saving industrial and mining lamps is a very
important factor. And different packaging processes will have a considerable
impact on the quality of the product. The energy-saving industrial and mining
lamps encapsulated with ordinary primer can reduce the light decay by 76%
compared with the energy-saving industrial and mining lamps encapsulated with
A-type low-decay glue under the same aging environment. Therefore, choosing an
energy-saving high bay lamp made with a good packaging process will greatly
extend its service life.
2. When the energy-saving high bay lamp bead is working, the single lamp
bead will be less heated, and the temperature of the bracket will not exceed 45
degrees. At this time, the life of the energy-saving high bay lamp will be
ideal, but when the energy-saving high bay lamp is composed of a lamp group,
the corresponding The temperature will rise, which is not conducive to the
long-term use of energy-saving industrial and mining lamps.
3. There are two ways to solve it. The first is to choose a lamp group
with a larger distance between the lamp beads, preferably above 25mm. The
second is that when the LED is working, it is best to have a small fan next to
it to help it disperse it. Hot air will also extend its service life.
Fourth, it is afraid of heat. The higher the temperature, the shorter
the life of the LED, and the lower the temperature, the longer the life of the
LED. The ideal working temperature of the LED is of course between minus 5 and
zero degrees. But this is basically impossible. Therefore, when consumers
choose energy-saving industrial and mining lamps, they must understand its
performance, and at the same time provide reasonable protection when using it,
so that it can give full play to its optimal use effect and let it add luster
to you.